Discriminators

Discriminators

Technological changes were taking place at a rapid rate too, and very few of the smaller companies managed to stay in competition with the big outfits. GOLDAK, METROTECH, IGWT, TEC, and, quite recently, ARADO stopped production of hobby machines. Some loyalists of metal detecting still treasure their Arado machines, which had a reputation for being difficult to set up, but were reputed to be the deepest-seeking hobby detectors ever made.

The biggest technical change in detectors was the development of the induction-balance system, where two coils are set up in an electrical equilibrium to produce a ‘null’ or zero balance. Introducing metal to the vicinity of the coils caused them to unbalance, producing a change of tone in the machine’s speaker. Scientists had long known that every metal has a specific response to stimulation by alternating current. Each metal produces a time lag or ‘phase angle’ in its induced current, in relation to the drive current. This meant that detectors could now be set up to ignore unwanted phase angles, and respond positively only to desired metals.

But there was also a downside to the development of the ‘discriminator’ detectors. Introducing discrimination always had the effect of reducing the sensitivity of the machine, so it was less able to find deep objects. In addition, there was the fact that some desirable metals were quite near the area of unwanted metals, such as iron. Gold, particularly in alloy form, was quite close to tinfoil in the overall spectrum, so the discrimination control had to be used carefully.

The price to be paid for setting up a detector to ignore iron and tinfoil was the possibility that, sooner or later, the user would scan over, and ignore, a valuable find, maybe even a   precious find buried on a beach.